Updating Firmware Using The Touchpanel Web Page - Extron electronics FPC 6000 User Manual

Updating Firmware Using the Touchpanel Web Page

8
9
1.
If you have not already done so, download the firmware file to a computer on the same
network as the touchpanel (see the previous section).
NOTE: Firmware files must have a .eff extension.
2. Open the FPC 6000 Web Page
Touchpanel Web Page: Firmware Uploader Pane
Figure 18.
3. Click Browse.
4.
In the dialog box that opens, navigate to the firmware location and select the file.
5.
Click Upload. The firmware file is uploaded to the touchpanel.
The upload takes a few minutes. A series of popup screens provide information about the
progress of the firmware update:
Figure 19. Popup Screens from Firmware Update
When the update is complete, the FPC 6000 reboots and the login screen is shown. You
need to log in to the controller once again (see
6.
Click to refresh the web page. You also need to log in to the web page once again (see
OK
FPC 6000 Web Page on page 19).
(see page 19).
Login Screen
FPC 6000 • Web Page
192.168.254.251
on page 22).
21