Table of Contents
Advertisement
Assembly
Assemble ColorSource Raceway
1:
Take the folded ColorSource Raceway out of the packaging and lay it out straight, face down,
on a flat surface. Leave the foam shipping collars on as long as possible to protect the sections
during assembly. Junction brackets are pre-attached to one end of each section.
2:
Loosen the screws slightly on the pre-attached junction bracket.
3:
Align the ends of the sections and slide the junction bracket into place.
4:
Secure the pre-attached junction bracket with the provided M4 POZIDRIV screws, and tighten all
12 screws.
5:
Repeat the process for the remaining sections.
Foam shipping collar
Assembly
3: Align
and slide
4: Secure and tighten
screws (x12)
2: Loosen
screws (x6)
9
Advertisement
Table of Contents
Need help?
Do you have a question about the ColorSource Raceway and is the answer not in the manual?
Questions and answers