Table of Contents
Advertisement
2:
Identify the location of the work-light connectors on the ColorSource Raceway. You will attach
the work lights to the brackets that are closest to the connector.
Note:
3:
Attach the work light to the appropriate bracket using the provided hardware (see image below).
and then continue to
24
You should have already installed a transition-box base on the bracket that will
support the work light. You will use the transition box to store the excess cord
connecting the work light to the ColorSource Raceway. If you did not install a
transition-box base, return to
Prodigy RACA mount
on
Connect work lights
Suspended mount, Dual batten suspended mount, or
page 19
and install the transition-box base on the bracket.
on
page 29
.
2: Identify the
work-light
connector
3: Attach the
work light to the
hanger bracket
Finished work light
ColorSource Raceway Installation Manual
Advertisement
Table of Contents
