Table of Contents
Advertisement
Attach work lights to batten accessory
1:
Attach the mounting hardware to the work lights.
2:
Identify the location of the work-light connectors on the ColorSource Raceway. You will attach
the work lights to the brackets that are closest to the connector.
3:
Attach the work light to the appropriate bracket using the provided hardware (see image below),
and then continue to
28
1: Attach mounting
1: Attach mounting
hardware
hardware
Connect work lights
on
2: Identify the
work-light
connector
3: Attach the
work light to the
accessory bracket
(Work light cable
not displayed)
page 29
.
Finished work light
ColorSource Raceway Installation Manual
Advertisement
Table of Contents
