Table of Contents
Advertisement
Before you begin
Overview
The ColorSource Raceway provides power and data in a lightweight, sleek profile that is perfect for
all-LED systems.
Safety
Consult your project drawing for the dimensions and weight of your specific ColorSource Raceway
system.
Maximum span
When mounting the ColorSource Raceway, position brackets no more than 10 ft (3 m) apart.
Maximum load (suspended mount)
The batten on the ColorSource Raceway supports a distributed load of 150 lb (68 kg) and a point load
of 65 lb (30 kg) across a 10 ft (3 m) span (see image below).
Maximum length
The ColorSource Raceway cannot exceed 72 ft (22 m) in length (74 ft [23 m] in batten length).
WARNING:
CAUTION:
Note:
Before you begin
ColorSource Raceway (rear view)
Point load = 65 lb (30 kg)
Uniform distributed load = 150 lb (68 kg)
Maximum 10 ft (3 m) span
Junction bracket
Suspending the ColorSource Raceway from brackets more than 10 ft (3 m)
apart risks structural failure and is not an approved use of this product.
• Verify that the mounting structure is capable of supporting the weight of
the ColorSource Raceway. Always follow applicable building codes when
attaching ColorSource Raceway to structural elements.
• When using the ETC aluminum batten for ColorSource Raceway, choose
clamps designed for use with an aluminum batten instead of C-clamps to
avoid damage to the batten.
For suspended-mount installations, do not hang the ColorSource Raceway until after
you attach the batten.
3
Advertisement
Table of Contents
