Table of Contents
Advertisement
3:
Identify the location of the work-light connectors on the ColorSource Raceway. You will attach
the brackets adjacent to the work-light connector faceplates.
4:
Attach brackets to the ColorSource Raceway (see images below).
5:
Attach the bracket mounting plate/transition-box base assemblies and remaining hardware to
the brackets (see images below).
Vertical orientation
3: Identify work-light
Horizontal orientation
3: Identify work-light
connector
4: Loosen sliding
raceway bracket,
position bracket
on raceway, and
then tighten to
fit
Installation
connector
4: Loosen sliding
raceway bracket,
position bracket on
raceway, and then
tighten to fit
5: Attach bracket mounting
plate/transition box and
optional anti-rotation
stabilizer
5: Attach U-bolt for
finished bracket
5: Attach bracket
mounting
plate/transition
box
17
Advertisement
Table of Contents
