Table of Contents
Advertisement
Optional anti-rotation
intended for support
2:
Install the ColorSource Raceway:
Vertical orientation
a: Identify the locations on the grid where the ColorSource Raceway will be supported, and then
attach the brackets to the grid using the provided U-bolts and nuts. Make sure that the
termination box will not be enclosed in mounting brackets.
b: Loosen the sliding raceway brackets, position the ColorSource Raceway in the brackets, and
then tighten to fit.
Horizontal orientation
a: Identify the locations on the grid where the ColorSource Raceway will be supported. Make
sure that the termination box will not be enclosed in mounting brackets.
b: Attach brackets to the ColorSource Raceway, and then attach the brackets to the grid using
the provided U-bolts and nuts.
Vertical orientation
14
Horizontal orientation
stabilizer, not
Assemble mounting hardware
Loosen sliding raceway
raceway in bracket, and
Assemble raceway hardware
Finished bracket
bracket, position
then tighten to fit
Horizontal orientation
ColorSource Raceway Installation Manual
Advertisement
Table of Contents
