Installation Instructions For Housing - Bosch FPA‑5000 System Information

50 en | Installation
2.
3.
4.
5.
6.
4.3.1

Installation Instructions for Housing

All housings and housing components are supplied with installation instructions ex works.
You can also find the installation instructions at www.boschsecurity.com by searching for the
type designation of the product you want to install. The document numbers of the installation
instructions can be found in the footer on every page of the document.
The tables below show the instructions available.
Frame Mounting
Panel housings for frame installation
CPH 0006 A Frame installation housing for 6 modules
MPH 0010 A Frame installation housing for 10 modules
Extension housings
EPH 0012 A Frame installation extension housing for 12 modules
PMF 0004 A Frame installation power supply housing
PSF 0002 A Frame installation power supply housing
USF 0000 A Universal frame installation extension housing
Mounting frames
FBH 0000 A Mounting frame, large
FHS 0000 A Mounting frame, large with distributor rail
07.2020 | 12.0 | F.01U.028.089
FBH 0000 A
Mark the 3 required holes on the wall as shown in the installation drawing for the
FSH 0000 A Mounting Frame (see FSH 0000 A Mounting Frame Small, page 63 ).
Remove the FSH 0000 A Mounting Frame.
At the marked points, drill holes approx. 55 mm deep with an 8-mm drill. Insert a dowel
in each hole.
Refit the FSH 0000 A Mounting Frame, as described in step 1.
Screw the FSH 0000 A Mounting Frame tight.
1
2
FSH 0000 A
System Information
Modular fire panel
Document number
4.998.154.002
4.998.154.003
4.998.154.005
F.01U.003.083
F.01U.003.082
F.01U.003.106
4.998.153.998
4.998.154.018
Bosch Sicherheitssysteme GmbH