Modular fire panel
Product group
Product name
Product group
Product name
Door controls
Automatic fire detectors
FMD-GT60 | FMD-GT50 | FMD-
GT50-SPACE
TSZ 0400
2.7
Networking
Notice!
You will find detailed information about the CAN and Ethernet networking of the panels in the
Networking Guide available for download at www.boschsecurity.com
2.8
Connection to BIS
The MPC Panel Controller can be connected to a building management system (BIS) via an
Ethernet connection and an OPC server.
Figure 2.8: Connection to BIS
For a multiple-building network, it is essential to clarify with the network administrator:
–
–
Notice!
For detaiIed information about the installation und configuration of the OPC server see the
FSM-5000-OPC-Server manual.
2.9
Connecting a Voice Alarm System
The Praesideo, PAVIRO or Plena voice alarm system can be connected via a data transmission
line to the panel. This enables the panel to control voice alarm zones. The control can be
defined down to the individual detector level.
Bosch Sicherheitssysteme GmbH
BIS
whether the network is designed for multiple-building connections (e.g. there must be no
technical interference due to differences in grounding potential)
whether the bus users are designed for this kind of network (e.g. sufficient bandwidth).
Connection via
Connection via
FAA-MSR 420
FLM-420-RHV
FLM-420-I2
System Information
Product Description | en
27
07.2020 | 12.0 | F.01U.028.089