Bosch FPA‑5000 System Information page 139

Modular fire panel
Addressing and Configuration in the Network
The remote keypads are identified in the network by a unique address. This address is set on
the rotary switches and is known as the rotary switch number (RSN) (see the figures in the
circle on the circuit diagrams).
Note the address on the sign above the rotary switches (see Addressing and Configuration of
Remote Keypad, page 140 , step 2).
Configure the remote keypad using the DIP switches. Mark the selected setting on the sign
below the DIP switches (see Addressing and Configuration of Remote Keypad, page 140 , step
4).
Bosch Sicherheitssysteme GmbH System Information
Installation | en 139
07.2020 | 12.0 | F.01U.028.089