Czm 0004 A 4 Zone Conventional Module - Bosch FPA‑5000 System Information

106 en | Installation
Warning!
There is a risk of injury if no temperature sensor is positioned between the batteries.
The temperature sensor is supplied with the power supply bracket and protects the batteries
!
against overheating. If the sensor is not positioned correctly, the batteries can overheat and
explode.
Position the temperature sensor between the batteries.
4.9.4 CZM 0004 A 4 Zone Conventional Module
The CZM 0004 A Conventional Module enables particular existing conventional peripheral
devices to be connected. It provides connections for four monitored conventional lines.
Figure 4.55: CZM 0004 A 4 Zone Conventional Module
Labeling
AUX1 + | AUX1 -
OUT1 - | OUT1 +
IN1 - | IN1 +
AUX2 + | AUX2 -
OUT2 - | OUT2 +
IN2 - | IN2 +
AUX3 + | AUX3 -
OUT3 - | OUT3 +
IN3 - | IN3 +
AUX4 + | AUX4 -
OUT4 - | OUT4 +
IN4 - | IN4 +
Notice!
To ensure operation of the fire alarm system with Extended Line Supervision (ELS, creeping
short circuit and creeping open monitoring), each conventional line must be terminated with
EOL modules.
07.2020 | 12.0 | F.01U.028.089
Connection
24 V DC auxiliary power supply zone 1
Zone 1 output low/zone 1 output high
Zone 1 input low/zone 1 input high
24 V DC auxiliary power supply zone 2
Zone 2 output low/zone 2 output high
Class A zone 2 input low/class A zone 2 input high
24 V DC auxiliary power supply zone 3
Zone 3 output low/zone 3 output high
Class A zone 3 input low/class A zone 3 input high
24 V DC auxiliary power supply zone 4
Zone 4 output low/zone 4 output high
Class A zone 4 input low/class A zone 4 input high
System Information
Modular fire panel
Bosch Sicherheitssysteme GmbH