Opening The Housing; Installing The Housing - Bosch FPC-500 Installation Manual

Conventional fire panel
3.2.2

Opening the Housing

Remove the cover of the fire panel. Loosen both screws on the
underside of the housing, lift up the cover approx. 20° and
remove it.
3.2.3

Installing the Housing

Use the panel housing to draw drill holes at the desired location
on the wall (arrows in figure below). As an option, you can use
the mounting dimensions indicated on the back of the housing.
Ensure that the housing is aligned horizontally and draw on the
Bosch Sicherheitssysteme GmbH
Installation | en
2020.02 | 9.0 | F.01U.172.980
13