Quick Installation Guide - Bosch FPA‑5000 System Information

48 en | Installation
Environmental Conditions
–
–
–
–
Positioning
–
–
–
Notice!
The maximum installation height is 2 m!
Functional Modules
–
Building Management System
–
Documentation
–
–
–
4.2

Quick Installation Guide

1 Keep to hand:
–
–
07.2020 | 12.0 | F.01U.028.089
Assembly and operation of the fire panel must be carried out in a clean and dry indoor
location.
Permissible relative humidity: max. 95 % at 25°C, non-condensing
To ensure optimum battery service life, the panel should only be operated at sites with
normal room temperatures.
Do not operate devices showing condensation.
Operating and display elements should be positioned at eye level.
The distance between the upper edge of the housing and the center of the panel
controller display is around 11 cm. For example, if the eye level required is 164 cm, the
housing upper edge installation dimension is 175 cm.
For frame installation housings, a clearance of at least 230 mm is required to the right of
the last housing to swivel out the installed housing (e.g. for connection, maintenance or
service).
Sufficient space should be left below and next to the panel for any possible extensions,
e.g. for an additional power supply or an extension housing.
Functional modules are encapsulated; the connection terminals are protected against
static discharge.
If connected to a building management system (Bosch Building Integration System BIS)
via an Ethernet interface using an OPC server, the following must be noted:
In a multi-building network, it is essential to clarify with the network administrator
whether the network is designed for multi-building connections (e.g. no interference due
to differences in grounding potential).
All product documentation including the operating instructions can be found on the DVD
that is supplied with the panel controller.
The current and full product documentation can be found on www.boschsecurity.com.
For those with access rights, the current wiring guide can be found on the extranet. This
contains information about the wiring of the functional modules and the peripheral
devices.
A printed user guide in the relevant national language is supplied with the panel
controller. Store the documents in a safe place.
The installation instructions supplied with the relevant components (housing, frame,
cables etc.)
The required tools.
An overview of the required tools can be found in the installation instructions.
System Information
Modular fire panel
Bosch Sicherheitssysteme GmbH