Built−In Housing For Concrete Ceilings - Bosch FAP-O 500 Series Product Information

Product Information 500 Series LSN Fire Detectors (EU)
5.4. Built−in Housing for Concrete Ceilings
ca. 150 mm
14.
The FAA−500−CB built−in housing is used for the installation of the detector into con-
crete ceilings. It allows for easy connection of conduits.
The FAA−500−CB built−in housing is placed on the concrete form, fastened and se-
cured against floating.
Pipe or cable inlets at the FAA−500−CB built−in housing within the wall areas are made
with an universal cutting tool. After removing the form−boards, the front part (see
Fig. 14., Pos. F) is opened with a fret−saw or hole saw.
Into the hole of the built−in housing, a FAA−500−BB ceiling mount back box is then
inserted which takes base and detector.
226 mm
226 mm
202 mm
Page 23
PI − 34.70 en
75 mm
F
BDL−F.01U.025.876
A5.en/ 02.02.2006
ST−FIR/PRM1 / zab