Safety Instructions - Bosch FPC‑500 Operation Manual

Conventional fire panel
Hide thumbs Also See for FPC‑500:
Table of Contents

Advertisement

4
en | Safety Instructions
1

Safety Instructions

Caution!
Only silence alarms once you have ensured that no persons will
!
be endangered by the deactivation of the sirens.
Caution!
Only switch zones to test mode for brief periods of time. Zones
!
in test mode will not trigger an alarm in the event of a fire.
Caution!
Only deactivate zones for brief periods of time. Deactivated
!
zones will not trigger an alarm in the event of a fire.
Notice!
Your fire detection system and all connected components must
be subjected to professional maintenance on a regular basis.
Observe all local regulations.
Danger!
The housing must only be opened by a specialist. There is a
danger of electric shock.
Caution!
Do not deactivate the power supply to the fire detection
!
system. After using up the emergency power supply, the fire
detection system will be unable to trigger a fire alarm.
Notice!
If you encounter any irregularities during the operation of your
fire detection system (fault messages etc.), contact your
specialist immediately.
2019.07 | 5.1 | F.01U.172.982
Conventional fire panel
Bosch Sicherheitssysteme GmbH

Advertisement

Table of Contents
loading

Table of Contents