Bosch FPA‑5000 System Information page 14

14 en | Product Description
Warning!
The power button must be used to switch off the device before removing the power supply. It
!
may not be disconnected from power supply while system is running. The device may be
damaged if this procedure is violated. Not following this procedure may result in loss of
warranty. Refer to user guide for further information.
Figure 2.3: Overview of panel controller
Pos. Designation
A Interfaces
B Touchscreen
C 6 fixed buttons
D Power button
E Memory card slot
F Ethernet ports
G 18 LEDs
Networking
A panel controller with premium license can be networked with up to 32 panel controllers,
remote keypads and OPC servers.
Panels and keypads display all messages, or you can form a group of panels and keypads.
Within one group, only messages of this group are displayed.
Alarm indication
All messages are shown on the display with a bright color. The displayed messages contain the
following information:
–
–
–
–
At any time, the operator can request a status overview for each evacuation zone and each
output connected to the fire protection equipment.
07.2020 | 12.0 | F.01U.028.089
Function
Panel networking and inputs for internal device monitoring
Operating the networked system through virtual buttons and variable display
windows
Standard entries
Shutdown and restart of the device
Memory card reader for maintenance services
Panel networking and interface to various systems
Indicating the operating status
Message type
Type of the triggering element
Description of the exact location of the triggering element
Logical zone and sub-address of the triggering element
System Information
Modular fire panel
Bosch Sicherheitssysteme GmbH