Bosch FPA‑5000 System Information page 9

Modular fire panel
Position Description
3 Distributor, optional (RLE)
4 Fire brigade peripheral module
5 Panel rail, short
6 Power supply bracket
Functions
The panel provides complete flexibility and thus customized solutions for any application.
The configuration of the components is supported by Safety Systems Designer for fire alarm
systems. The software provides information about the size and number of housings, the
modules and the energy balance calculation.
Depending on specific requirements, the planning involves choosing from the following
options:
–
–
–
–
–
–
–
Module
ANI 0016 A
Bosch Sicherheitssysteme GmbH
Position Description
9
10
11
Housing type (frame and wall mounting)
– Selection of a basic housing
– Extension housing, optional
– Power supply housing, optional
– Installation kits (optional) for installation in 482.6 mm (19") racks
Panel controller
– Selection from a range of language versions
Panel rail
– Selection according to housing type and/or number of functional modules required
Power supply
– Batteries
– Power supply units for additional power supply
– Power supply brackets
The power supply brackets on frame installation housings are preinstalled ex works;
for wall-mounted housings, power supply brackets can be selected as required.
Thermal printer
– THP 2020 A Thermal Printer
The thermal printer is used to document operating procedures on the panel, as well
as alarm and fault messages. Plain text can also be printed. Programming is carried
out via the programming software FSP-5000-RPS.
Additional accessories
– Front doors
– Cable sets for special applications.
Functional modules
Functional modules are independent, encapsulated units that can be inserted into any
slot on the panel. The power supply and the data traffic with the panel are therefore
provided automatically. The module is identified by the panel with no further settings and
operates in the default operating mode (plug and play).
Wiring to external components is performed using compact connector/screw terminals.
After a replacement, only the connectors need to be reinserted; there is no need for
extensive rewiring.
Description
Annunciator module Indicating system statuses, with 16 red and 16
Panel rail, long
Batteries
Remote keypad
Function
yellow freely programmable LEDs
System Information
Product Description | en
07.2020 | 12.0 | F.01U.028.089
9