Bosch FPA‑5000 System Information page 93

Modular fire panel
Figure 4.42: MPC connection to BIS via OPC server
Installation
The MPC Panel Controller can be installed in the following housings: CPH 0006 A, MPH 0010
A, HCP 0006 A and HBC 0010 A.
For installation, follow the instructions on the following pages.
Notes:
–
–
–
–
Bosch Sicherheitssysteme GmbH
OPC
Server
FPA-5000
FPA-1200
Make sure the Panel Rail Short is installed before you install the panel controller.
Secure the grounding cable at the screw provided on the housing (4).
Plug the cable into the IN slot on the Panel Rail Short (6).
Caution: Connection at the OUT slot or to a Panel Rail Long is not permissible.
Plug the terminal element for the data bus into the OUT slot on the last occupied panel
rail (8).
Ethernet
100BaseTX
2
1
0
System Information
Installation | en 93
07.2020 | 12.0 | F.01U.028.089