5�7�- No� Of Stages - Circutor Computer SMART III 6 Instruction Manual

Press the
digits to be modified.
The key shows the next option.
The key shows the previous option.
The
Press
Press the
If no keys are pressed for 5 minutes, the device switches to the simulation screen,
.
SCREEN"
5�7�- NO� OF STAGES
In this point the number of stages is selected, in other words the number of relay outputs that the
device will have. According to the model, Computer SMART III 6, SMART III 12 or SMART III 14 , it can
be configured with up to 6 or up to 12 outputs.
Press the
digits to be modified.
The key shows the next option.
The key shows the previous option.
80
key to enter edit mode. It is identified by the
key skips to the previous voltage and the
to validate the data; the
key to access the next programming step.
key to enter edit mode. It is identified by the
key skips to the next voltage.
symbol disappears from the display.
Computer SMART III
symbol and the flashing of the
"5.30.- SIMULATION
symbol and the flashing of the
Instruction Manual