5�29�- No� Of Operations Alarm - Circutor Computer SMART III 6 Instruction Manual

Press
Maximum value: 999 mA.
Minimum value: 1 mA.
If the value entered is lower than the minimum value or higher than the maximum value, the backlight
of the display flashes and the value entered is replaced with the minimum or maximum value, or with
the last value validated.
Press the
If no keys are pressed for 5 minutes, the device switches to the simulation screen,
.
SCREEN"
5�29�- NO� OF OPERATIONS ALARM
In this point the number of operations of any of the stages above which the alarm
triggered can be configured.
Note: The alarm must be enabled (
Press the
digits to be modified.
The key increases the digit value.
The
The
Press
Maximum value: 99999.
Minimum value: 10.
If the value entered is lower than the minimum value or higher than the maximum value, the backlight
of the display flashes and the value entered is replaced with the minimum or maximum value, or with
the last value validated.
104
to validate the data; the
key to access the next programming step.
key to enter edit mode. It is identified by the
key reduces the digit value.
key skips to the previous digit and the
to validate the data; the
symbol disappears from the display.
"5.21.- ENABLING ALARMS"
key skips to the next digit.
symbol disappears from the display.
Computer SMART III
"5.30.- SIMULATION
).
symbol and the flashing of the
Instruction Manual
E17
will be