5�7�- No� Of Stages - Circutor Computer SMART III FAST 12Vdc Instruction Manual

Press the
digits to be modified.
The key shows the next option.
The key shows the previous option.
The
The
Press
Press the
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
SCREEN" .
5�7�- NO� OF STAGES
In this point the number of stages is selected, in other words the number of relay outputs that the
unit will have.
Depending on whether the model is Computer SMART III 6 FAST 12Vdc or SMART III 12 FAST 12Vdc,
it can be configured with up to 6 or up to 12 outputs.
Press the
digits to be modified.
76
key to enter editing mode. It is identified by the
key skips to the previous voltage.
key skips to the next voltage.
to validate the data; the
key to access the next programming step.
key to enter editing mode. It is identified by the
symbol disappears from the display.
Computer SMART III FAST 12Vdc
symbol and the blinking of the
"5.29.- SIMULATION
symbol and the blinking of the
Instruction Manual