Table of Contents
Advertisement
Intel® Server System M50CYP2UR Family System Integration and Service Guide
3.9
Trusted Platform Module (TPM) Installation
This section provides instructions to install a Trusted Platform Module (TPM) in the system. Refer to the
Intel® Server M50CYP Family Configuration Guide for available options.
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* head screwdriver #1
1.
Power off the system and disconnect the power cable(s).
2.
Remove the system top cover (see
3.
Remove the air duct (see
4.
Locate the TPM module connector on the server board next to the PHM.
5.
Insert the plastic stand-off into the server board mounting hole (see Letter A).
6.
Place the TPM module over the connector and confirm the orientation of the module.
7.
Press the module down onto the connector (see Letter B).
8.
Secure the TPM module to the stand-off with the fastener screw (see Letter C).
9.
Reinstall the air duct (see
10. Reinstall the system top cover (see
70
Figure 80. Trusted Platform Module (TPM) Installation
Section
3.1.1).
Section
3.2.1).
Section
3.2.2).
Section
3.1.2).
Advertisement
Table of Contents
