Figure 137. Phm Alignment With Socket Assembly; Figure 138. Phm Installation Onto Server Board - Intel M50CYP2UR Series System Integration And Service Manual

Intel® Server System M50CYP2UR Family System Integration and Service Guide
3. Align pin 1 indicators of the processor carrier clip and processor with pin 1 indicator on the bolster plate.
Caution: Processor socket pins are delicate and bend easily. Use extreme care when placing the PHM
onto the processor socket. Do not drop it.
4. Set all four anti-tilt wires on the heat sink to the inward position (see Letter A).
5. Holding the PHM horizontally, carefully lower it on to the bolster plate's alignment pins (see Letter B).
6. Set all four anti-tilt wires on the heat sink to the outward position (see Letter C).

Figure 137. PHM Alignment with Socket Assembly

Figure 138. PHM Installation onto Server Board

107