Xilinx Artix-7 FPGA AC701 Getting Started Manual page 28

Advanced Bring-up with Base Targeted Reference Design
X-Ref Target - Figure 21
5.
X-Ref Target - Figure 22
6.
28
Send Feedback
The screen capture in Figure 21
Figure 21: Structure of a7_base_trd Directory
Right-click on the script (quickstart.sh), select Properties. In the Permission tab,
check the Allow executing file as program box. The script is now executable. To run
the script, double-click quickstart.sh and select Run in Terminal.
Figure 22: Running the quickstart.sh Script
The GUI showing driver installation options appears as shown in
Subsequent steps demonstrate the GUI operation by installing and removing drivers.
Click Install.
www.xilinx.com
shows the content of the a7_base_trd folder.
UG967 (v4.0.1) March 05, 2014
UG967_21_110513
UG967_22_110513
Figure 23.
AC701 Getting Started Guide