Xilinx Artix-7 FPGA AC701 Getting Started Manual page 23

Hardware Bring Up
All procedures listed in the subsequent sections require super-user access on a Linux PC.
When using the Fedora 16 LiveDVD provided with the kit, super-user access is granted by
default due to the manner in which the kernel image is built. If not using the LiveDVD, it
is important to ensure that super-user access is granted.
1.
X-Ref Target - Figure 16
AC701 Getting Started Guide
UG967 (v4.0.1) March 05, 2014
Advanced Bring-up with Base Targeted Reference Design
With the host PC powered off, insert the AC701 board into the selected PCIe x4 (or
wider) edge connector (see
smaller lane width endpoint to be installed into a larger lane width PCIe connector.
Figure 16: AC701 Board Installed in a PCIe x16 Connector
www.xilinx.com
Figure 16). The PCI Express specification allows for a
23
Send Feedback