Xilinx Artix-7 FPGA AC701 Getting Started Manual page 12

Basic Hardware Bring-up with Built-In Self-Test
X-Ref Target - Figure 6
X-Ref Target - Figure 7
Run the BIST Application
1.
2.
3.
12
Send Feedback
Figure 6: Selecting the Cypress Driver in the Device Manager
d. Click the Port Settings tab, then click the Advanced... button.
e. Select an open COM port between COM1 and COM4 (see
Note:
Steps and diagrams refer to a Windows host PC.
Figure 7: Setting the Port for the Cypress Driver
Download the AC701 BIST Design Files (RDF0220) from the
Documentation webpage under the Example Designs section.
Unzip the design files to the C:\ directory.
Start the installed terminal program.
www.xilinx.com
UG967_06_111412
Figure 7).
UG967_07_111412
AC701 Evaluation Kit
AC701 Getting Started Guide
UG967 (v4.0.1) March 05, 2014