Reboot The Ap From The Local Browser Ui - NETGEAR WiFi 6 AX1800 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204

Reboot the AP from the local browser UI

You or NETGEAR technical support can reboot the AP from its local browser UI, either
locally or remotely, for example, if the AP seems to be unstable or is not operating
normally.
To reboot the AP from the local browser UI:
1. Connect your computer or mobile device to the AP in one of the following ways
• Connect directly to the AP's WiFi network or LAN. (Applies to the AP in either
operation mode.)
• Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2. Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 32.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 38.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED.
The ADVANCED Home page displays.
5. In the Router Information pane, click the REBOOT button.
A pop-up warning window displays.
6. Click the Yes button.
The AP restarts.
Diagnostics and
Troubleshooting
226 User Manual