Image Area Zoom; Full-Screen Operation; Playback With Text Display - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

118

Image Area Zoom

Full-Screen Operation

Playback with Text Display

Playback Screen
Intellex
At any time, in either menu mode or full-screen mode, you can
zoom in on a specific area of the playback image screen. Then you
can observe activity from that camera more closely.
1. To enlarge an area of the image, click and drag the mouse
pointer over the area to enlarge. As you drag the mouse, the
pointer changes to
NOTE: When zooming to a desired area, the unit maintains a 4:3
(width-to-height) ratio. If you drag tall and thin, the
selected area will not be tall, but will maintain the general
shape of the screen. Likewise, if you drag short and wide,
the selected area will not be wide, but will maintain the
general shape of the screen.
2. After you release the mouse button, the enlarged (zoomed)
area appears.
3. To return to normal display, click again on the image area.
Use full-screen mode to hide the playback controls and indicators
and to display the image area full-screen.
From the playback screen, click the Full Scrn button to switch to
full-screen mode.
You can use the full-screen control bar to play and pause image
playback, and to control playback speed and direction. Move the
mouse to the bottom of the screen to display the control bar. Click
the button on the right to display the image area at its normal size.
If text information was recorded, playback with text display is
enabled. Click the Text button (A) to toggle text display mode on or
off. When text display is turned on, the playback screen size is
decreased and a Text display box on the right shows the text stream
related to the video currently playing. Use the scroll bar in the text
display to scroll through the text display buffer. The text display
highlights the segment of text that was recorded nearest in time to
the video currently playing.
®
LT Digital Video Management System
.