Camera Associations Tab; Edit A Text Stream; Delete A Text Stream - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

Installation and Operating Instructions

Camera Associations Tab

Edit a Text Stream

Delete a Text Stream

Text
Stop Bits — Select a stop bit for the text stream of 1, 1.5 or 2 bits.
The default stop bit is 1 bit.
Flow Control — Select a handshake type for the text stream,
either Xon/Xoff, Hardware, or None. The default is None.
Camera Associations — Select one or more cameras to be
associated with the text stream.
1. Enter a descriptive Name.
2. Select the appropriate configuration from the pull-down
menus for the COM Port, Bits Per Second, Data Bits, Parity,
Stop Bits, and Flow Control.
Text streams can be associated with one or more cameras, to control
when text is recorded. Text is recorded on the selected stream when
any associated camera records video. Associations also define
defaults when downloading or exporting video, i.e., the text from
this stream is included by default when downloading video from
selected camera(s) unless turned off.
1. Click the Camera Associations tab, use the radio buttons to
select the camera(s) to be associated with the text stream.
2. Select OK to add the new camera associations. Click Cancel
to restore the previous settings. Click Help to display online
help for this screen.
Use the Edit option to modify the name, associated camera(s) or any
other information pertaining to a text stream.
1. Select the text stream to be changed.
2. Click Edit. The Text Stream Setup screen appears.
3. Make the desired changes.
4. Select OK to accept the changes. To cancel the changes, click
Cancel. Click Help to display online help for this screen.
Use the Delete option to delete a text stream.
1. Select the text stream to be deleted.
2. Click Delete. A confirmation screen appears.
3. Select Yes to delete the text stream. Select No to close this
screen without deleting the text stream.
35