96
Changing Users
Logging In and Changing Users
Intellex
NOTE: This option is only available if system security is enabled
(see
Security Setup
When another person takes control of the unit, the previous
operator must log out and the new operator must log in.
1.
Click Utility on the main screen. The Utility Options screen
appears.
2.
Click Log Out. A confirmation message appears.
3.
Select one of the following options:
No — Click to close this screen without logging out.
Yes — Click to log out. The Enter PIN Code screen appears
and the unit prevents any access until another user logs in.
4.
Log in the new user (see
®
LT Digital Video Management System
on page 39).
Logging In
on page 95).