Date/Time Setup - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

84

DATE/TIME SETUP

Date/Time Setup
Intellex
The Date/Time Setup screen lets you change the unit's date and
time settings, which the unit encodes on each image. You must
possess the Setup Date/Time privilege to access it (see
Setup on page 39).
NOTE: In network installations, Network Client maintains the
master clock and can update each unit's date and time
daily. Therefore, except for initial setup, adjusting the
system date and time may have no effect. Refer to the
Network Client instructions for more information.
1. From the main screen, click the Setup button. The Setup
Options screen appears (see
2. Click the Date/Time button. A warning screen appears.
3. Select Yes to proceed. Click No to close this screen and return
to the Setup Options screen.
Use the Time option to change the system time.
1. Click the hours display. Click up arrow or down arrow to
display the desired number of hours (24-hour format).
2. Click the minutes display. Click up arrow or down arrow to
display the desired number of minutes.
3. Click the seconds display. Click up arrow or down arrow to
display the desired number of seconds (five-second
increments).
Use the Date option to change the system date.
1. Click down arrow to display the calendar.
2. Click left arrow to select the previous month or right arrow to
select the next month.
3. Click the day of the month to select the day. The calendar
closes and the selected date is displayed.
Use the Set option to assign the new system date and time. The unit
displays a confirmation screen.
®
LT Digital Video Management System
Setup Options Screen
Security
on page 29).