Repair A Volume - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

88
Add Volume

Repair a volume

Storage
Intellex
CAUTION: Do not attempt to add/remove/convert volumes to the
database when any of the following processes are running: Data
lifetime, local or remote search, export, or remote download. Doing
so will likely crash the Intellex or lead to other unexpected behavior.
Use the Add Volume screen to add volume information for the
selected volume.
In the Label field, specify a label for this volume, using the virtual
keyboard or an attached keyboard, and in the Percent of space
field, enter the amount of physical drive space to use for this
volume. The default is 100%.
Click OK to save the new volume information and return to the
Storage Setup screen.
Click Cancel to exit this screen without saving any changes.
CAUTION: Do not turn off or re-start the Intellex unit while
repairing a volume, or else you may lose the
database. Wait until the volume repair is complete
before starting any other process.
To repair a volume:
1. Select (highlight) the volume to repair.
2. Click Remove; then the selected volume will be labeled
Other Intellex.
3. Select the volume now labeled Other Intellex.
4. Click Repair.
The Exit button text will change from grayed out to white when the
volume repair is complete.
®
LT Digital Video Management System