Text; Add A Text Stream; Text Stream Tab - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

34

Text

Add a Text Stream

Text Stream Tab

Text
Intellex
NOTE: You must possess the Setup Text privilege to access this
screen.
1. From the main screen, click the Setup button. The Setup
Options screen appears.
2. Click the Text button. The Text Stream Setup screen appears.
Text Stream Setup — Allows you to add, delete, or edit text
streams.
Name — Each stream can be given a descriptive name for iden-
tification purposes. This name is used when selecting text to
review and when searching the image database.
Type— Displays the text data source.
Description — Provides the settings chosen for a particular
text stream.
Add — Select this option to add a new text stream.
Edit — Select this option to edit an existing text stream.
Delete — Select this option to delete a text stream.
To cancel the changes, click Close. Click Help to display online help
for this screen.
Use the Add button to define the text stream. From the Text Stream
Setup screen, click Add. The Text Stream Configuration screen
appears.
Text Stream — Use this tab to configure the text stream.
Name — Use the virtual keyboard or the physical keyboard (if
attached) to enter a descriptive name (up to 25 characters) for
the text data source.
COM Port — Select the appropriate COM port from the
pull-down list, only the currently available COM ports are
shown.
Bits Per Second — Select the data transmission rate. Select a
speed from 110 bps to 256000 bps. The default speed is 110 bps.
Data Bits — Select a word size of 7 or 8 bits. The default is 7 bits.
Parity — Select Even, Odd or None. The default parity is Even.
®
LT Digital Video Management System