Erase Cd-Rw; Log Out; Shutdown - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

108

Erase CD-RW

Log Out

Shutdown

Utility Options
Intellex
Use this option to erase a rewritable CD (CD-RW) disc. After
inserting the CD-RW drive, click OK. A message displays when the
disc is erased.
Use this option to inform the system that you are transferring
control to a different user. The unit blocks all access until a new user
logs in. Normal processing continues whether or not a user is
logged in.
NOTE: This option is only available if system security is enabled
(see Security Setup
1. From the main screen, click the Utility button. The Utility
Options screen appears (see
2. Click Log Out. A confirmation message appears.
3. Select No to close this screen without logging out. Select Yes
to log out. The system displays the Enter PIN code screen.
The Intellex digital recorder is designed to operate continuously.
However, if you must shut it down, use the following procedure.
CAUTION: Always complete the shutdown procedure before
turning off unit power.
NOTE: Shutting down the system is a protected feature. You
must possess the Shutdown privilege to access it (see
Security Setup
1. From the main screen, click the Utility button. The Utility
Options screen appears (see
2. Click Shutdown. A confirmation message appears.
3. Select No to cancel the shutdown and return to the Utility
Options screen.
NOTE: If the unit is backing up images, it interrupts the backup
before shutting down.
Click Yes to shut down the system. The unit exits the Intellex
software and turns off unit power automatically.
®
LT Digital Video Management System
on page 39).
Utility Options
on page 39).
Utility Options
on page 105).
on page 105).