Weekday/Weekend/Holiday Setup - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

Installation and Operating Instructions
Weekday/Weekend/Holiday
Setup
Schedule Setup
Start at ... — Set the time to start holiday processing on the
day before the holiday. The default is 18:00 (6:00 p.m.).
1. Click the hours display. Click up arrow or down arrow to
display the desired hour (24-hour format).
2. Click the minutes display. Click up arrow or down arrow
to display the desired minutes (30-minute increments).
Include part of day after — Select this option to stop holiday
processing at a specific time on the day after the holiday.
End at ... — Set the time to stop holiday processing on the day
after the holiday. The default is 06:00 (6:00 a.m.).
1. Click the hours display. Click up arrow or down arrow to
display the desired hour (24-hour format).
2. Click the minutes display. Click up arrow or down arrow
to display the desired minutes (30-minute increments).
Select another Custom Schedule Setup Option for configuration.
Otherwise, click OK to accept the new weekend and holiday
settings, as well as any changes on the other Regular Schedule
Setup screens, and return to the Setup Options screen. Click Cancel
to cancel the changes and return to the Setup Options screen. Click
Help to display online help for this screen.
Use the Weekday, Weekend and Holiday screens to configure the
operating schedule for each camera. All three screens operate the
same way. The Weekend tab only appears if Include Weekend is
selected on the Mode screen. The Holiday tab only appears if
Include Holiday is selected on the Mode screen.
Schedule Area — Use the main schedule area to define and
display the active, alarmed and disabled segments for each camera.
Hours are listed across the top of the schedule area in 30-minute
segments. Camera names are listed down the left side of the
schedule area in numerical order (1–16).
Active — Select this option to define an active segment. During an
active segment, the unit records images from the camera at the
configured record rate and quality. A live filter can also be
configured for the segment. (See
page 57 for information about defining an active segment.)
Working with Schedule Segments
53
on