Port Address Setup - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

®
Intellex LT Digital Video Management System
86
In the Port Address setup screen you may specify a fixed port
PORT ADDRESS
address for the Intellex unit to use for connecting to a network. The
SETUP
default settings are 5000 for the Communications Port and 5001 for
the Live Video Port. Unless instructed otherwise by your IS
administrator, you should accept these settings, as they correspond
to the default settings in the Network Client software. If you do
change port address assignments, they will take effect only after the
unit is restarted.
See the Connecting Network Client with the Remote Intellex Unit
section in the Network Client Installation & Operating Instructions for
deta ils o n co nf ig urin g th e N et wo rk Clien t so f twa re to
communicate with your Intellex unit.

Port Address Setup