Live Filter Configuration; Light Change - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

Digital video management system
Hide thumbs Also See for Intellex Intellex LT:
Table of Contents

Advertisement

68

Live Filter Configuration

Light Change

Schedule Setup
Intellex
Select another segment for configuration. Otherwise, click OK to
accept the configuration for this segment as shown, and return to
the Weekday, Weekend or Holiday screen. Click Cancel to cancel
the changes and return to the Weekday, Weekend or Holiday screen.
Click Help to display online help for this screen.
NOTE: Before following any procedures in this section, select the
live filter and click Setup (see
page 47,
Configuring an Active Segment
Configuring an Alarmed Segment
After you select a live filter, use the appropriate filter configuration
screen to configure it. This section describes how to configure each
of the following live filters:
Light Change
Motion Detection
Perimeter Protection
Use the Light Change screen to configure the target area for the light
change filter. Once configured, the filter is triggered whenever the
light level changes. The light level can change when someone turns
lights on or off, uses a flashlight or blocks the camera lens.
After you select the Light Change filter and click the Setup button,
the Light Change screen appears.
Light Change: (camera name) — Indicates the camera name.
Image Area — This area of the screen displays a camera image and
provides a reference when configuring the filter.
Active Zone — The active zone is the area in which the filter's
targets are activated. It can be nearly any shape or size.
Restore — Click to restore the active zone to its dimensions
when you first accessed this screen.
Clear — Click to erase all of the targets in the active zone.
Sensitivity — The unit uses this setting to distinguish between
valid and invalid changes in the target area. At higher settings,
small changes trigger the filter. At lower settings, larger changes are
required to trigger the filter.
®
LT Digital Video Management System
Regular Cameras Setup
on page 66).
on
on page 64 and

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Intellex lt dv16000

Table of Contents