Playback Controls And Indicators - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

Installation and Operating Instructions
Playback Controls and
Indicators
11
17
Playback Screen
5. Playback Overlay — Displays the name of the displayed
camera, the image date and time and the alarm input or type
of alarm event (if any).
6. Slider — Drag to select any starting point in a video segment
by moving the slider control. As you move the slider, the Date
and Time at the slider's location in the segment is displayed in
the main screen. Move the slider to any desired point in the
segment, then click Play to begin or resume playback of the
segment at that point.
7. Text — Click ("A") to toggle mode on or off.
8. Mute — Click to mute the playback of audio.
9. Volume Slider — Slide the volume slider to adjust the output
level of the playback audio.
10. Text Display — Displays the text stream associated with the
video.
Use the mouse pointer and the following on-screen controls to play
back images:
12
11. Record — This indicator is lit when the unit is recording
images. On the front panel, this indicator is labeled REC.
12. Play — This indicator is lit when the unit is playing back
images. Play changes to Pause when playback is paused.
When playing back images restored from an archive tape, the
unit displays Play (Archive) or Pause (Archive).
13. Play/Pause knob or VCR Control — Controls the playback
speed and direction (see Using the Playback Screen). The unit
displays the playback speed (1x to 5x) and direction (forward
or reverse).
13
18
19 20 21 22
15
14
113
16
23