Quick Camera Controls; Controlling The Pan-Tilt Control Via Mouse; Zoom Via Mouse Scroll Wheel; Pattern And Preset Camera Controls - American Dynamics Intellex Intellex Ultra User Manual

Quick Camera Controls

Start a camera control session to open the quick camera controls.

Controlling the Pan-Tilt Control via Mouse

1 Float the cursor over the center of the video pane. The Cursor Origin Mark
2 Click and drag the cursor to set the direction and speed, then release.
• The camera's movement speed increases proportionally with the arrow's distance from the
cursor origin mark.
• The camera's direction is relative to cursor origin mark.

Zoom via Mouse Scroll Wheel

• Point the camera at a target.
• Scroll the mouse wheel forward (zoom in) and backwards (zoom out).

Pattern and Preset Camera Controls

Note
Preset and Pattern appear only if they are set up for the selected camera. Use Intellex, Network
Client, or a Touch Tracker to program presets and patterns.
Preset and Pattern enable dome control via camera scan modes. They function in the overlay for
cameras that use the VM16, VM16E, USB-Sensornet, or VM96RTT camera handlers. USB-
Sensornet and VM16E camera handlers let you program presets and patterns for specific dome
cameras.
A Preset is a pre-positioned camera scene that you program for cameras installed with pan/tilt and
motorized lens capability. A Pattern is a sequence of pan, tilt, zoom, focus and iris movements
from a single, programmable dome. The dome learns these movements during programming for
later execution. You can run preprogrammed presets and patterns and define presets and patterns
without a Touch Tracker.
Basic Features
appears.
User's Guide 11