Playback Overlay; Camera Location Display Format Setup - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

Installation and Operating Instructions

Playback Overlay

Camera Location
Display Format Setup
Display Setup
Enable — Select Yes to display image information in the image
area during playback. The unit name, camera name, date, time and
alarm input (if any) appear in the designated corner. The default is
Yes.
Select No to hide image information during playback.
Overlay Position — Select a screen position for the overlay
information during playback: Upper-Left, Upper-Right, Lower-
Left, Lower-Right. The default is Upper-Right.
Click OK to accept the displayed mode settings, as well as any
changes on the other Display Setup screens, and return to the Setup
Options screen. Click Cancel to cancel the changes. Click Help to
display online help for this screen.
Use the desired camera format (2x2, 3x3, 4x4) to specify the
location of each camera.
(Cameras) — The name of each camera is listed in order from 1 to
16. Camera names are configured in the Cameras portion of the
Setup Options screen.
Reset — Click to reset the order of cameras in the 2x2, 3x3, or 4x4
configuration to its default (as shown):
To configure any display format:
The camera format screen shows the location of each camera as
configured.
1. Select the name of the camera from the list. The indicator for
the camera lights.
2. Move the mouse pointer to any location on the grid.
3. Click the grid location for the selected camera. The name of
the camera displays in its grid location.
Click OK to accept the camera location display format settings, as
well as any changes on the other Display Setup screens, and return
to the Setup Options screen. Click Cancel to cancel the changes.
Click Help to display online help for this screen.
83