Live Monitor (Optional); Dome Controller (Optional); Unit Schedule - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

102

Live Monitor (Optional)

Dome Controller
(Optional)

Unit Schedule

Controlling Image Display
Intellex
Use one of the following methods:
• Click the Seq button. Sequencing stops and cameras display
in the previous format.
• Click any format button (1x1, 2x2, 3x3 or 4x4). Cameras
display in the appropriate format.
• Click any camera button (1–16). The selected camera
displays in the single-pane format.
If an optional live monitor is installed, the unit displays all live
images continuously on the optional monitor. Live display
commands, such as selecting a camera or a screen format, appear
immediately on the optional monitor.
If a dome controller (Sensormatic VM16 or American Dynamics
ADTT16) is connected, you can use it to display a specific camera,
change the display format (1x1, 2x2, 3x3, 4x4) or sequence cameras
(live mode only). Refer to the dome controller instructions for more
information.
Images from cameras that are disabled in the schedule will not
display. This helps the user monitor cameras that are being
recorded. For more information, see
®
LT Digital Video Management System
Schedule Setup on page 45.