Selecting the application mode
The application mode can only be selected in
standby mode. The NIV application mode can only
be selected if LeakV is displayed in the status line
on the screen.
Prerequisite: The Config. menu is opened.
Selecting the O
2
The O
supply can only be set in standby mode.
2
Prerequisite: The Config. menu is opened.
1
1 Press the
key.
2
3
4
2 In menu 2 press the O
Selecting Ti or I:E
Prerequisite: The Config. menu is opened.
1
1 Press the
key.
2
3
4
2 In menu 2 press the Ti / I:E key.
3 Select Ti or I:E by turning the rotary knob and
push to confirm.
Instructions for use Carina SW 3.2n
supply
suppl. key.
2
1
1 Press the
key.
2
3
4
2 In menu 2 press the Method key.
3 Select NIV or Tube by turning the rotary knob
and push to confirm.
The selected application mode is displayed in the
status line of the screen.
3 Select LPO or HPO by turning the rotary knob
and push to confirm.
If LPO has been selected, LPO is displayed in the
status line on the screen.
Configuration
93