Table of Contents
Advertisement
Technical data
Setting values (cont.)
Tidal volume with apnea ventilation
Range
Resolution
Volume Guarantee
Range
Inspiratory O
concentration (in HPO mode)
2
Range
Resolution
AutoAdapt
Range
Positive end-expiratory pressure with AutoAdapt
Range
Resolution
Pressure support with AutoAdapt
Range
Resolution
Time in AutoAdapt
Range
Resolution
Performance characteristics
Control principle
Supply system for patient flow
Maximum continuous inspiratory flow
Device resistance during device failure
The resistance is specified for the breathing circuit,
i.e., between the emergency breathing valve (un-
derpressure), the expiratory valve, and the patient
connection. The specified resistances take the
breathing gas humidifier in account where neces-
sary but not additional accessories such as bacte-
rial filters or HMEs. See the applicable instructions
for use for these components for the resistance.
124
VTapn
100 to 2000 mL, BTPS
10 mL
VG
On, Off
FiO
2
21 to 100 %
1 %
Aut.Adapt
On, Off
PEEPadp
3 to 20 mbar (or hPa or cm H
1 mbar (or hPa or cm H
Δ
PSadpt
0 to 37 mbar (or hPa or cm H
1 mbar (or hPa or cm H
Tadpt
5 to 120 min
1 min
Time-controlled or flow-controlled and pressure-
controlled or volume-controlled
Turbine
180 L/min, BTPS (of which max. 120 L/min with
100 % O
)
2
Instructions for use Carina SW 3.2n
O)
2
O)
2
O)
2
O)
2
Advertisement
Chapters
Table of Contents
