Setting Ranges For Ventilation - Dräger Carina Instructions For Use Manual

Operation

Setting ranges for ventilation

Ventilation
parameter
VC-SIMV
1)
VT [mL] 100 to 2000
2)
Pinsp [mbar,
cm H O]
2
PEEP [mbar, 3 to 20
cm H O]
2
3)
FiO [%] 21 to 100
2
Trigger Off, Normal,
Sensitiv.
RR [/min] 5 to 50
4)
Ti [s] 0.3 to 8
or I:E 1:39 to 2:1
Ramp Auto/0.1 to 2.0
5)
Pmax [mbar, LeakV: 5 to 40
cm H O] ExpV: 5 to 50
2
6)
ΔPsupp
LeakV: 0 to 37
[mbar, cm H O] ExpV: 0 to 47
2
Timax [s]
Apn.Vent.
7)
RRapn [/min]
7)
VTapn [mL]
VG
8)
Aut.Adapt
9)
Tadpt [min]
9)
PEEPadp
[mbar, cm H O]
2
9)
ΔPSadpt
[mbar, cm H O]
2
1) For SPN-CPAP/PS the following applies: Only with activated Volume Guarantee VG.
2) For PC-BIPAP and PC-AC the following applies: Only Pinsp values that are at least 2 mbar above the set PEEP value can
be set.
3) Only with HPO O supply.
2
4) For VC-SIMV/PS and PC-BIPAP/PS the following applies: The maximum inspiratory time Timax for pressure-supported
breaths is derived from Ti, see page 150.
5) For SPN-CPAP/PS (VG) the following applies: Only with activated apnea ventilation or activated Volume Guarantee VG.
6) For SPN-CPAP/PS the following applies: Only with deactivated Volume Guarantee VG. For PC-BIPAP and VC-SIMV the
following applies: only with trigger activated
7) Only with apnea ventilation activated.
8) Only in NIV application mode with Volume Guarantee VG deactivated.
9) Only with Aut.Adapt function activated.
68
VC-AC
100 to 2000
– –
3 to 20
21 to 100
Off, Normal,
Sensitiv.
5 to 50
0.3 to 8
1:39 to 2:1
Auto/0.1 to 2.0
LeakV: 5 to 40
ExpV: 5 to 50
–
– –
– –
– –
– –
– –
– –
– –
– –
– –
Ventilation mode
PC-BIPAP PC-AC
–
LeakV: 5 to 40 LeakV: 5 to 40
ExpV: 5 to 50 ExpV: 5 to 50
3 to 20 3 to 20
21 to 100 21 to 100
Off, Normal, Off, Normal,
Sensitiv. Sensitiv.
5 to 50 5 to 50
0.3 to 8 0.3 to 8
1:39 to 2:1 1:39 to 2:1
Auto/0.1 to 2.0 Auto/0.1 to 2.0
–
LeakV: 0 to 37
ExpV: 0 to 47
–
–
–
–
–
–
–
–
–
Instructions for use Carina SW 3.2n
SPN-CPAP/PS
(VG)
– 100 to 2000
–
3 to 20
21 to 100
Normal, Sensitiv.
–
–
Auto/0.1 to 2.0
– LeakV: 5 to 40
ExpV: 5 to 50
– LeakV: 0 to 37
ExpV: 0 to 47
– 0.4 to 10.0
– On, Off
– 5 to 50
– 100 to 2000
– On, Off
– On, Off
– 5 to 120
– 3 to 20
– 0 to 37