Table of Contents
Advertisement
FORM 160.72-O1 (810)
figure 26 -
PRINTER SCREEN
overvieW
This screen allows definition of the necessary commu-
nications parameters for the printer.
displaY onlY
Time remaining until next print
Displays the time until the next print log will occur, if
the function is enabled.
prograMMaBle
log start Time
Access Level Required: OPERATOR
Set the time at which scheduled print togs will begin.
output interval
Access Level Required: OPERATOR
Define the interval at which log printing will occur.
JOHNSON CONTROLS
prinTer sCreen
automatic printer logging (enabled / disabled)
Access Level Required: OPERATOR
Enable the printer to begin printing status reports be-
ginning at the programmed start time and recurring at
the interval defined above.
printer Type
Access Level Required: OPERATOR
Define the printer type connected to the chiller system.
print report
Access Level Required: OPERATOR
Select the report type to print when the PRINT RE-
PORT key is selected. This can vary from Status report
(present system parameters), Setpoints report (present
value of the system setpoints), Schedule report (present
value of the system schedule times) or a Sales Order
Data report (information provided on the Sales Order
screen). A print report is generated upon completion of
selection.
3
69
Advertisement
Table of Contents
