Table of Contents
Advertisement
FORM 160.72-O1 (810)
figure 5 -
CONDENSER SCREEN
overvieW
This screen displays a cutaway view of the chiller con-
denser. All setpoints relating to the condenser side of
the chiller are maintained on this screen. Animation in-
dicates condenser liquid flow. This screen also serves
as a gateway to controlling the Refrigerant Level.
displaY onlY
return Condenser liquid Temperature
Displays the water temperature as it enters the con-
denser.
leaving Condenser liquid Temperature
Displays the water temperature as it leaves the con-
denser.
Condenser saturation Temperature
Displays the saturation temperature in the condenser.
small Temperature difference
Displays the difference between the Condenser Refrig-
erant temperature and the Leaving Condenser Liquid
temperature. The Condenser Refrigerant temperature
will be represented by the Condenser Saturation tem-
perature.
JOHNSON CONTROLS
Condenser sCreen
Condenser pressure
Displays the refrigerant pressure in the condenser.
Condenser refrigerant Temperature
Displays the temperature of the refrigerant in the con-
denser, If the sensor is present and enabled at the soft
key toggle on this screen. The service access level is
required to enable/disable this display.
subcooler refrigerant Temperature
Displays the temperature of the subcooler refrigerant in
the condenser. If the sensor is present and enabled un-
der Options on the Configuration screen. The service
access level is required to enable/disable this display.
sub Cooling Temperature
This display will only appear if either one of the fol-
lowing applies.
Displays the difference between the Condenser Satu-
rated Temperature and Subcooled Refrigerant Tem-
perature. If the Subcooler Refrigerant Temperature is
present and enabled under Options on the Configura-
tion screen. The service access level is required to en-
able/disable this display.
3
27
Advertisement
Table of Contents
