Gearbox Screen - Johnson Controls YORK OM Titan Operating Instructions Manual

FORM 160.72-O1 (810)
figure 12 -

GEARBOx SCREEN

overvieW
This screen displays the major components as well as
the temperatures, pressures, and outputs for the gear-
box lubrication system. In addition, this screen allows
manual control of the auxiliary oil pump, if available,
for up to 10 minutes.
displaY onlY
low speed shaft end Bearing Temperature
Displays the temperature of the bearing at the shaft end
of the low speed side of the gearbox, if present and
enabled.
low speed Blind end Bearing Temperature
Displays the temperature of the bearing at the blind end
of the low speed side of the gearbox, if present and
enabled.
high speed shaft end Bearing Temperature
Displays the temperature of the bearing at the shaft end
of the high speed side of the gearbox, if present and
enabled.
JOHNSON CONTROLS
gearBox sCreen
high speed Blind end Bearing Temperature
Displays the temperature of the bearing at the blind end
of the high speed side of the gearbox, if present and
enabled.
oil pump run output (led)
Indicates whether the digital output from the controls is
commanding the pump to run.
pump interlock (led)
Indicates whether the auxiliary run contacts in the
pump starter are closed. (MADE)
oil Temperature
Displays the temperature of the oil being supplied to
the gearbox.
shaft pump oil pressure
Displays the oil pressure supplied to the gearbox as
measured by the output of the shaft oil pump.
supply oil pressure
Displays the oil pressure after the oil cooler and filter
that is supplied to the gear box bearings.
3
41