Drive Options Screen - Johnson Controls YORK OM Titan Operating Instructions Manual

FORM 160.72-O1 (810)
figure 31 -

DRIVE OPTIONS SCREEN

gear lubrication
AOP – Auxiliary Oil Pump
No AOP
anti-recycle
Displays Disabled or Enabled
Motor Bearing Temperature sensors
Displays Disabled or Enabled
Depending on existence of sensors
gear Bearing Temperature sensors
Displays Disabled or Enabled
Depending on existence of sensors
Motor auxiliary start Contacts
Displays Disabled or Enabled
Depending on existence of starter contacts
This is an additional safety contact from starter in most
cases is not required.
Motor power (KW) sensor
Displays Disabled or Enabled
Depending on existence of sensors
JOHNSON CONTROLS
drive opTions sCreen
gear Box oil Cooler Water differential pres-
sure sensor
Displays Disabled or Enabled
Depending on existence of sensors
prograMMaBle
Change setpoints
Allows a qualified Service Technician to change any
of the anti-recycle setpoints shown above. Refer to the
Service Instructions (Form 160.72-M1).
navigaTion
home
Access Level Required: VIEW
Returns user to Home Screen.
setup
Access Level Required: VIEW
Returns to the Setup Screen.
3
79