Time Alarms And Trips Screen - Johnson Controls YORK OM Titan Operating Instructions Manual

FORM 160.72-O1 (810)
figure 36 -

TIME ALARMS AND TRIPS SCREEN

overvieW
This screen displays the time alarms and trips. Each
point has either an alarm (warning) or a trip (shutdown)
or both. These points will be configured at commis-
sioning by a qualified Johnson Controls Service Tech-
nician during the manufacturing of the chiller.
displaY onlY
auxiliary oil pump overrun Time
Displays the Auxiliary Oil Pump Overrun alarm point.
auxiliary oil pump shutoff deadline
Displays the Auxiliary Oil Pump Shutoff Deadline
alarm point.
auxiliary oil pump shaft pump uptime
Displays the Auxiliary Oil Shaft Pump Uptime alarm
point.
auxiliary oil pump interlock delay
Displays the Auxiliary Oil Pump Interlock Delay trip
point, if enabled.
JOHNSON CONTROLS
TiMe alarMs and Trips sCreen
Motor interlock delay
Displays the Motor Interlock Delay trip point, if en-
abled.
Motor start Contact delay
Displays the Motor Start Contact Delay trip point, if
enabled.
digital vibration enable delay
Displays the Vibration Enable Delay trip point, if en-
abled.
Chilled liquid flow start delay
Displays the Chilled Liquid Flow Switch Start Delay
trip point.
Condenser liquid flow start delay
Displays the Condenser Water Flow Switch Start De-
lay trip point.
startup alarm/Trip enable delay
Displays the time during prelube startup that alarms
will be bypassed to allow pressures to stabilize.
3
89