Table of Contents
Advertisement
FORM 160.72-O1 (810)
figure 44 -
CUSTOM SETUP SCREEN
overvieW
This screen allows the Service Technician to select
up to 10 parameters for display on the Custom View
Screen.
Requires a login access level of SER-
VICE. Service Technicians refer to the
YORK Service Manual 160.72-M1 for
operation instructions and explanation of
all programmable setpoints and displayed
values.
displaY onlY
Custom slot numbers (1-10)
Lists the available parameters that can be displayed.
The desired parameters for display are selected from
this list.
prograMMaBle
page up
Scroll up through list of available parameters.
page down
Scroll down through list of available parameters.
JOHNSON CONTROLS
CusToM seTup sCreen
select
First use the Page Up and Page Down keys to scroll
through the Slot Numbers list and note the number of
the parameter(s) to be displayed. Pressing the Select
key places a green colored selection box around Cus-
tom Slot 1. If it is desired to change an already entered
parameter, use the 5 and 6 keys to place the selection
box around the slot number to be changed. With the
selection box around the slot number to be changed or
entered, press the ENTER (ü) key. A dialog box is dis-
played permitting data entry. Using the numeric key-
pad keys, enter the desired slot number and press the
ENTER (ü) key.
Custom slot (1-10)
Use the select key and numeric keypad keys as de-
scribed above and enter the slot number from slot
numbers list. Setting the slot number to zero clears the
display of this slot number.
Clear display
Pressing this key clears all selected parameters from
the Custom View screen.
3
105
Advertisement
Table of Contents
